CNC Machinist II

SUMMARY The CNC Machinist II is responsible for all scheduled parts assigned to them to be completed per the drawing(s) and by the scheduled due date in all cells. Responsible to machine acceptable production parts utilizing production equipment per drawing, DHR, and any other ancillary written instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Adhere to the Company�s Quality Management System to ensure compliance with applicable regulatory requirements.
  
• Set up and operate CNC (Computer Numerical Controlled) Swiss screw machine lathes according to blueprints and specifications.
  
• Read and interpret blueprints, engineering specifications, and shop orders to determine machine setup, production methods, and sequence of operation.
  
• Set all tools, coolant lines, collets, and guide bushings.
  
• Understand CNC programming and can make changes as needed to optimize a process.
  
• Observes the operation of machines and verifies conformance of machined parts to specifications, using measuring instruments, such as gages, calipers, micrometers, comparator, and tool makers.
  
• Understand and perform all work instructions.
  
• Participates in on-the-job training of the Cell Operators and Cell Operator Trainees.
  

. Accurately enter all information requested into MRP/ERP system. . Performs special assignments as directed by supervision commensurate with experience.

• Performs other duties as assigned.
  
• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice
  

SUPERVISORY RESPONSIBILITIES

Direct Reports: Yes N/A

QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required for this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. . Must have 5 years of manufacturing experience. . Must have a working knowledge of CNC programming. . Must be accurate, detailed oriented, and quality conscious.

EDUCATION AND/OR EXPERIENCE High school diploma or equivalent required.

CERTIFICATES, LICENSES, REGISTRATIONS None WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. An industrial setting dedicated to the production and assembly of medical devices that utilizes machinery, equipment, and specialized processes to transform raw materials into finished products. Fast paced and dynamic environment with a focus on meeting production targets and deadlines, with an emphasis on efficiency, productivity, and quality control. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts, and vibration, The employee is occasionally exposed to a variety of extreme conditions, such as high and low temperatures on the manufacturing plant floor, lighting, loud noises from machine operations, exposure to chemicals and physical hazards, and handling of hazmat waste. In such cases, proper Personal Equipment (PPE) is required and will be provided

PHYSICAL DEMANDS

Analysis of Physical DemandsN =Never,R = Rarely Less than 1 hour per week,O = Occasional 1% to 33% of time,F = Frequent 34% to 66% of timeC = Constant over 66% of time Activity Frequency Activity Frequency Lifting/Carrying N R O F C Twisting/Turning N R O F C

Under 10 lbs

Reach over shoulder

11-20 lbs

Reach over head

21-50 lb

Reach outward

51-100 lbs

Climb

Over 100 lbs

Crawl

Pushing/Pulling N R O F C

Kneel

Under 10 lbs

Squat

11-20 lbs

Sit

21-50 lbs

Walk-Normal Surfaces

51-100 lbs

Walk-Uneven Surfaces

Over 100 lbs

Walk-Slippery Surfaces

Other N R O F C

Stand

Keyboard/Ten Key

Bend

Fingering (fine dexterity)

Driving N R O F C

Handling (grasping, holding)

Automatic Trans

Repetitive Motion - Hands

Standard Trans

Repetitive Motion - Feet

1st Shift Monday - Thursday 5:30 am - 3:30 pm